評価: 37
2
1
My furby just quit moving and his eyes want to stay shut .so i put a piece of paper in 1 eye lid to keep them open. Verbally he is ok .just NO MOVEMENT AT ALL..what can i do to fix?.is there an fix it shop for furny? So i can get him fixed ?
この質問は役に立ちましたか？
評価: 2.5千
5
2
13
The small 6V brushless DC motor went wrong. I had the same issue. You can replace it with one from a PC DVD reader (this is the door opener motor). Shaft is smaller but it's ok, diameter is good. You need a solder iron as well to replace electronic part from DC motor.
このアンサーは役に立ちましたか？
There is a PCB Board at the back of the furby that controls the movements and it could be damaged or corrupted. 2 of my furbies have this problem and is there any way that this problem can be troubleshot. If so, let me know
@Oliver Soanes You could try to clean the board with rubbing alcohol, this helps as it cleans up any debris along the way.
評価: 782.3千
1.1千
893
2.3千
gaylee marie check the Light sensor photocell in Furby's forehead. I would start on that one and see if it is still functioning. For way more info on the Furby, check this site. It has great information and plenty of autopsy pics. Attached is the diagram for the Furby's electronics. check it out and see if that will help to bring Furby back. Hope this helps, good luck.
このアンサーは役に立ちましたか？
@oldturkey03 where did you find the anatomy of a furby? :-)
@avanteguarde years of collecting ;-)
@oldturkey03 I wonder if you have enough information to reprogram to be a time traveling furby with the voice of a certain Austrian movie star sent to protect us from the future.
過去 24時間: 0
過去 7 日: 8
過去 30 日: 13
今までの合計 1,578
