メインコンテンツにスキップ
リペアコミュニティに参加 - アカウントの作成

Nintendo DS Liteは、ニンテンドーDSの後継モデルとして2006年に発売されました。このデバイスの開口作業は簡単で、修理もシンプルです。

Replace DS Lite CPU

What tools do you need for replacing the CPU on a DS Lite, and wich ways can be used to pry off the CPU ? I'v got 3 motherboards with (blackscreen) bootup seems their CPU aint good. I'v opened them by desoldering the 4 slot1 contacts and bend it up a little. After pushing it hard back into place 1 board began to works again.

For the other 2 i can't say this. Maybe the CPU is toasted ? I cant get them to work (yet)

Please Advice! wich ways is the best for repairing the CPU and what tools do you need?

Thanks!

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

ベストアンサー

Hi dbnijmegen, sometimes it is good to have a schematics of the board, and check if there is voltage supplying to the CPU.

e.g. certain power management chip, etc.

the cpu i believe is a BGA, which replacement can be difficult without proper tools and skills.

you need a rework station, e.g. hot air, bga rework station infrared to remove it.

and resoldering ... those bga balls need to be in place.

このアンサーは役に立ちましたか?

スコア 1

1件のコメント:

Hello Augustine, Thanks for your reply. By testing out all problems i figured out it must be a bad CPU Since i got 1 back to work. i figure, would there be a way without this station. ex. by a heatblower ? one cpu only needed a little more pressure on it. i think the same problem is for the 2 other motherboards, but i cant get them to work by supply some extra pressure to it.

So either 1, i need to find another possible way to make sure the cpu is attached proper.

or 2: i need to replace whole CPU cause its toasted. (i guess, no experience YET!)

Where can u buy this station, what does i costs, and also i need something to pull it off and put it back on it ? How you soldier it back on ? also with the BGA station?

Thanks! Dennis

さんによる

コメントを追加

回答を追加する

dbnijmegen さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 6

今までの合計 809