メインコンテンツにスキップ

Repair guides and support for the third-generation 5D, a DSLR camera released by Canon in 2012.

9の回答 すべてを表示

Replacing Mode Dial on Canon 5DMkIII

The button and metal face plate for the mode dial on my Canon 5DMkIII are missing. I lost them last December while running through the jungle, trying to keep up with a troop of chimpanzees. The dial itself is still intact and I've been able to change the mode by pressing a small pin into the button hole to unlock the dial.

I have a complete replacement dial/button/face plate in hand. Does anyone know how complicated it is to change this out or where I might find detailed instructions. . . . . .or at this point, should I just send it in to a professional for repairs (I have replaced components on a number of other cameras, with good success).

Thanks!

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 1

コメント:

my canon 5d mark 3 brokened hot sho. if i no how can replese that

による

my canon 5d mark 3 brokened hot sho. if i no how can replese that

による

コメントを追加

Android 修理キット

A new screen or battery is one kit away.

ショップを見る

Android 修理キット

A new screen or battery is one kit away.

ショップを見る

1回答

If you have the mode dial cover you can replace it with a little lock tight super glue if it came with the 3m adhesive on the back it will fall off again. I had this same problem. Also you will find a small notch on the mode dial that helps you to align it properly. I hope this helps.

この回答は役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Robert Johnson さん、ありがとうございました!
統計データを表示:

過去 24時間: 1

過去 7 日: 9

過去 30 日: 40

今までの合計 1,118