メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

2016年3月に発売された4インチのiPhone。ハードウェア仕様は6sに類似しています。シルバー、スペースグレイ、ゴールド、ローズゴールドのカラーが揃っています。16/64 GB容量、Model A1662とA1723

795の回答 すべてを表示

Screen not firing up

Phone came into the shop yesterday and this could be bad

Unit seems to have no power and will not turn on

1. Tested Battery over half charged

2. Plug in charge cable Phone gets slightly warm after about 10mins charge

(normal and charging)

3. Changed Screen no change

4. Plugged into itunes itunes sees phone

5. Put on another screen (both new) no change

6. Checked main board no damage to connectors

Starting to get worried for this phone, anyone have any ideas ??

Cheers

回答がありました! View the answer 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

Nintendo Switch 修理キット

ゲームを再開するための、早くて簡単な修理キット

Switch 修理キットページへ

Nintendo Switch 修理キット

ゲームを再開するための、早くて簡単な修理キット

Switch 修理キットページへ

2件の回答

選択されたソリューション

have you tried power cycling the phone? pop the battery and press the power button then plug back in.

if that doesn't work you could have blown the backlight chip by changing screen without disconnecting the battery first.

rip the backlight off a working screen and shine a torch behind the lcd to confirm

この回答は役に立ちましたか?

スコア 1

コメント:

Thanks for the quick answer, I new as soon as I posted this I should have mention rule 101. Isolate power source. Sorry.

Yes I did isolate the power source and i have disconnected the battery and retried to start the phone to no avail

さんによる

no problem, next step is to tear the black backlight off the back of the screen you won't damage anything so don't be scared then you will be left with the lcd with you can shine a torch thru and see if the lcd is working

さんによる

Ripped a good screen off one and no back light. Looking more like the Backlight circuit problem

さんによる

コメントを追加
最も参考になった回答

If iTunes recognizes your device and multiple screens don't work, then check the LCD with a flash light. If you see a dim image, then it sounds to me like you have a blown backlight circuit on the logic board. It's usually the filter but it can also be the rest of the circuit.

It's either the screen or the backlight circuit on the logic board. If you have access to a known-good screen, try that first. Otherwise, you will need to find a reputable shop that does micro-soldering.

この回答は役に立ちましたか?

スコア 5

コメント:

Thank you for your time, great help. That is why I like this forum. Working alone in a shop you don't always have the answers and it is great to "put it out there" To this great pool of knowledge

Thank you again

さんによる

My pleasure!

if this answer solved your problem, please “Choose as Solution”. This allows people in the future to understand which answers helped solve the problem and adds value to the site. - Thanks

さんによる

コメントを追加

回答を追加する

charlieclemett さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 2

今までの合計 55