修理を始めるには コミュニティ ストア

モデル番号はA1238/80、120、160GBハードドライブ/ブラックもしくはシルバーメタルフロント

904回答 すべてを表示

オプション

iPod Classic will not boot after battery replacement

Hello!

I've got an iPod Classic 7g thin 160GB that only holds a charge for an hour or so. I ordered a battery kit from ifixit, followed the directions exactly, and the iPod refuses to boot.

With the new battery installed, the iPod appears dead, no nothing. When I plug it in with the lock switch in the 'unlocked' position, the Apple logo faintly flashes for a nanosecond, goes dark, and repeats endlessly. Once I flip the switch to 'locked,' the screen goes blank.

I know I didn't damage anything because when I reinstall the stock battery and it boots and works fine. Could I have gotten a bad battery?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 1
コメントを追加

1 件の回答

フィルタ：
参考になった順 新しい順 古い順
最も参考になった回答

オプション

@spoonland3r sounds to me like you answered your own question "when I reinstall the stock battery and it boots and works fine." thus it sure sounds like a bad battery. I would recommend you replace it once more. Please make sure that you are careful around the battery connector. This model has issues with it coming of the board. I use a L-shaped paperclip to lift the locking mechanism.

このアンサーは役に立ちましたか？

はい いいえ
スコア 1

1件のコメント:

Thanks for the reply! I was careful to unclip and reclip the connector very gently with the spudger in the kit. I'll get in touch with ifixit for an RMA then.

さんによる

コメントを追加

回答を追加する

Eli Horyza さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 4

今までの合計 85