修理を始めるには コミュニティ ストア

Bluetooth on-ear headphones with 40 mm drivers and a 610 mAh battery. Released in 2014.

21回答 すべてを表示

オプション

The Left side of my headphone is not working

Hello,

The left side of my headphone is not working now. I charged it fully but no use. I tried connecting it with the cable but still no use. I've no idea what to do as it's out of warranty and JBL is telling me to pay 75% of the MRP. Any solution guys?

Appreciate your assistance

Regards,

Josh

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 8
4 件のコメント

@joshanjoy check this viudeo https://www.youtube.com/watch?v=1CMVoqfh... for a teardown to see how to get into your headphone.

さんによる

I also have the same problem and I must still fly for 18 hours from London to Cape Town tomorrow. This really sucks!

さんによる

My JBL bluetooth headphones were not working on the left side too. They were surprisingly easy to fix. Just like in this video: https://youtu.be/iTHJBDAdRos

さんによる

Thanks for the reply @solderfix

I but a new headphone now :P

さんによる

コメントを追加

3件の回答

フィルタ：
参考になった順 新しい順 古い順
最も参考になった回答

オプション

Left side,

  1. you remove the padding
  2. you remove 4 screw
  3. you use a very small screwdriver to pry the pivot point to be able to gently slide the speaker off.
  4. you will see that the speaker wires for the left speakers are no more soldered.

#

Block Image

  1. pull them a little bit to have more room to work
  2. use a soldering iron to fix them back respecting the positive/negative connection(red+/black-)

#

Block Image

Voila! Worked for me.

Sorry for bad english

このアンサーは役に立ちましたか？

はい いいえ
スコア 6

1件のコメント:

hello! I'v checked it all trough, there's not a single wire disconnected.

さんによる

コメントを追加

オプション

Hello....I have a problem

I use JBL headphones.

I accidentally pulled the wire really fast and then I couldn't see the earphones mark anymore

I can hear from the phone and one side of the earphones at the same time.

The wire also have a strange curvy spot....I think something is broken

(Sorry for bad English)

このアンサーは役に立ちましたか？

はい いいえ
スコア 1
コメントを追加

オプション

@joshanjoy there is a crossover cable from one driver (speaker) to the other, check that out. Use a multimeter and check for continuity. Also check the solder connections on the driver (speaker) make sure the cable is still soldered on.

このアンサーは役に立ちましたか？

はい いいえ
スコア 0

1件のコメント:

I'll check

Thanks for your reply @oldturkey03

:)

さんによる

コメントを追加

回答を追加する

Joshan Joy さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 7

過去 30 日: 25

今までの合計 50,791