The display loses sensitivity, sometimes goes blank.

Question

iPhone 5s

2013年9月10日に発表されたApple iPhone 5sの修理情報とガイドです。モデル A1533、A1453、A1457、A1528、A1530、A1518。

3530回答すべてを表示

Gary Tash @gwilliamt

評価: 11

1

投稿日: 2017年2月17日

オプション

The display loses sensitivity, sometimes goes blank.

iPhone 5s.

The display (and apparently to phone) does not work unless the upper left corner is depressed (pinched between thumb and finger), when depressed it moves noticeably, about 1/32 to 1/16 of an inch. If it is held depressed, display and touch sensitivity seem to work fine.

Opened the phone, found a screw that was not in its place, and one that was loose (I tightened it). The loose one was in the area of the upper left in the screen assembly.

I could not find where the displaced screw is supposed to be.

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

コメントを追加

1 件の回答

ベストアンサー

iMedic @theimedic

評価: 57.5千

iMedic Phone Repairs

18

77

212

投稿日: 2017年2月17日

オプション

Sounds to me like you need a new display. It should work fine, upright or closed. Sounds to me like the cable is the issue. I would try to get that display exchanged from where you got it.

このアンサーは役に立ちましたか？

はいいいえ

スコア 3

5 件のコメント:

Thanks for the quick answer. The display is a replacement from ifixit.

Not sure what you mean by upright or closed, but have considered a new display. However, not sure that is the issue, especially with the loose screw rattling around, for which I have found no place missing a screw ( I have not completely disassembled the phone, just opened it leaving the display cables attached.)

There is a spring contact in the upper left corner that makes a connection between the screen assy and the m-board (I assume). I don' t know it's specific function, but given its location precisely where the "pinching" together of the case has to happen, it appears possible that the pinch would secure that connection, and so I wonder if there a fault related to that contact that needs remedy.

Gary Tash さんによる2017年2月17日

The spring contact I am referring to is attached to the LCD shield plate. I also note now that the 2.7mm screw securing that corner of the shield is missing (the loose screw already mentioned is more like a 1.2mm). So, another anomaly in the upper left corner of the assembled phone.

Gary Tash さんによる2017年2月17日

Spring contact? You mean this?

[image|1022257]

iMedic さんによる2017年2月18日

that doesn't look like anything in my iPhone 5s.

Gary Tash さんによる2017年2月18日

Sorry. Got the phone wrong. Totally my fault. I'll snap a shot tomorrow, and see if we can get this sorted for you

iMedic さんによる2017年2月18日

コメントを追加

Thanks for the quick answer. The display is a replacement from ifixit.

Not sure what you mean by upright or closed, but have considered a new display. However, not sure that is the issue, especially with the loose screw rattling around, for which I have found no place missing a screw ( I have not completely disassembled the phone, just opened it leaving the display cables attached.)

There is a spring contact in the upper left corner that makes a connection between the screen assy and the m-board (I assume). I don' t know it's specific function, but given its location precisely where the "pinching" together of the case has to happen, it appears possible that the pinch would secure that connection, and so I wonder if there a fault related to that contact that needs remedy. — Gary Tash
The spring contact I am referring to is attached to the LCD shield plate. I also note now that the 2.7mm screw securing that corner of the shield is missing (the loose screw already mentioned is more like a 1.2mm). So, another anomaly in the upper left corner of the assembled phone. — Gary Tash
Sorry. Got the phone wrong. Totally my fault. I'll snap a shot tomorrow, and see if we can get this sorted for you — iMedic

iPhone 5s

The display loses sensitivity, sometimes goes blank.

1 件の回答

回答を追加する