修理を始めるには コミュニティ ストア

The third iteration of the 10.1 inch Galaxy Tab tablet.

126回答 すべてを表示

オプション

Display cable connector damaged(on the displayboard)

Hi,

got a salvaged Tab 3 with a damaged board connector on the display logic board.

see photos.

has anybody some experience with repairing this. unfortunately i have just some basic soldering skills and not really used a rework station before.

Block Image

Block Image

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

1 件の回答

フィルタ：
参考になった順 新しい順 古い順
最も参考になった回答

オプション

@shrubbery if you have not had a chance to practice some microsoldering, I suggest that you do not try to replace it. It's a bit of a PITA to solder and will require the right tools and experience to be successfully repaired. I'd send it off to someone that specialized in board repair. This will of course depend on where you are located. @refectio and others on this forum have specialized in this type of repair. Contact them and see what they think.

このアンサーは役に立ちましたか？

はい いいえ
スコア 2

2 件のコメント:

thanks for you input, hade same concerns about the repair

さんによる

I agree with @oldturkey03, this is not a "let's try this" type of repair. Depending on the model, sometimes sourcing the right connector is very difficult. The connector melts really easily so these are not trivial to replace if you don't have any experience.

さんによる

コメントを追加

回答を追加する

Shrubbery さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 68