Hard drive replacement recognition

Question

iMac Intel 20" EMC 2105 and 2118

Model A1174 with 2 GHz Core Duo or Model A1207 with 2.16 or 2.33 GHz Core 2 Duo

212回答すべてを表示

Carter @carter76974

評価: 1

2

投稿日: 2017年1月24日

オプション

Hard drive replacement recognition

Just replaced the HDD with a known working one. It is not being recognized.

When I start up from a dock unit has no problems, but does not show the newly installed drive. Unit works fine from the external dock (drive).

I have apple service manual and have viewed you replacement video. From what I can tell the drive is properly installed and everything plugged in properly. So what am I missing, or where should I be looking?

Not my first rodeo… and as you know these units are a bear!

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

コメントを追加

1 件の回答

ベストアンサー

mayer @mayer

評価: 685.3千

MacHale Enterprises

3.4千

1.1千

2.6千

投稿日: 2017年1月24日

オプション

Looks about this vintage:

Apple iMac "Core 2 Duo" 2.16 20-Inch Specs

Identifiers: Late 2006 - MA589LL - iMac5,1 - A1207 - 2118

The drive has to be formatted. Boot up from your original system installation disk, go to the second page pull down menu to Utilities > Disk Utility and format it. Then install a system.

このアンサーは役に立ちましたか？

はいいいえ

スコア 3

8 件のコメント:

Carter here, I am sorry perhaps I was not clear enough about the facts.

The drive is already a formatted, loaded working drive (one pulled from my Mac Pro). It is not a formatting problem nor a system problem. it is a hardware snafu, and the drive is properly "plugged in". (I have formatted and installed hundreds of drives)

Carter さんによる2017年1月25日

The drive may not be backward compatible. What drive are you using? Did I get the correct machine?

mayer さんによる2017年1月25日

Yes, you have the right machine. It is not about the drive's compatibility,it will work from my external dock. Better odds in the wiring or another unseated plug, or, or, or…..

Carter さんによる2017年1月25日

Did you put a system on it?

Pre-Installed MacOS: X 10.4.7 (8K1106) Maximum MacOS: X 10.7.5*

What was going on with the old drive?

mayer さんによる2017年1月25日

I used a working OSX 10.7.5, I am not sure about the old one. It has been in storage for a few years. That being said, the iMac works just fine when it boots from my ext. dock. Again, it is not about the 'drive', it is about the rest of the unit. (i.e. wiring, plugs etc.) As I have it back together now (except for the 'cover', I would pose the question before removing the screen and such and therefore know where to focus my search.

Carter さんによる2017年1月25日

3件以上のコメントを表示

コメントを追加

Carter here, I am sorry perhaps I was not clear enough about the facts.

The drive is already a formatted, loaded working drive (one pulled from my Mac Pro). It is not a formatting problem nor a system problem. it is a hardware snafu, and the drive is properly "plugged in". (I have formatted and installed hundreds of drives) — Carter
The drive may not be backward compatible. What drive are you using? Did I get the correct machine? — mayer
Yes, you have the right machine. It is not about the drive's compatibility,it will work from my external dock. Better odds in the wiring or another unseated plug, or, or, or….. — Carter
Did you put a system on it?

Pre-Installed MacOS: X 10.4.7 (8K1106) Maximum MacOS: X 10.7.5*

What was going on with the old drive? — mayer
I used a working OSX 10.7.5, I am not sure about the old one. It has been in storage for a few years. That being said, the iMac works just fine when it boots from my ext. dock. Again, it is not about the 'drive', it is about the rest of the unit. (i.e. wiring, plugs etc.) As I have it back together now (except for the 'cover', I would pose the question before removing the screen and such and therefore know where to focus my search. — Carter

iMac Intel 20" EMC 2105 and 2118

Hard drive replacement recognition

1 件の回答

回答を追加する