修理を始めるには コミュニティ ストア

モデル番号A1502 / 2.4, 2.6, 2.8 GHz デュアルコアIntelプロセッサ/ 2013年10月発売

552回答 すべてを表示

オプション

Part of the components covered by a sticker

Inside the 13" MacBook Pro with Retina display Late 2013 there is a part close to the battery with some chips that are covered with a sticker and a warning message. I guess those are related to the battery but could not find anything specific.

After a liquid spill I have cleaned the logic board but the battery is not working and I suspect it could be because it is very sticky on that part (it was Coca Cola, terrible)

Is it safe to clean that part with alcohol as I did with the rest of the components or better not to touch it in any way?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
1件のコメント

@claudiosposito " I just checked the battery logic board and one chip looks damaged" and "some chips that are covered with a sticker and a warning message" hard to identify. Post some good pictures of what you see with your question. For that use this guide iFixitでの質問に画像を追加する方法 It will allow us to see what you see.

さんによる

コメントを追加

1 件の回答

フィルタ：
参考になった順 新しい順 古い順
最も参考になった回答

オプション

Isopropyl alcohol is safe to use on most PCBs. Don't get it on any mechanical parts though, like optical or hard drives, or fans. Use 70-99% isopropyl alcohol and use a swab to dab it on, then if debris needs to be cleaned off, use a soft cloth. Once the debris is clear, dab on a little bit of alcohol over the surfaces in question, then let it evaporate completely.

Don't get anhydrous alcohol, as pure chemicals can be dangerous and finicky to work with.

このアンサーは役に立ちましたか？

はい いいえ
スコア 1

1件のコメント:

Thank you for the tips. I just checked the battery logic board and one chip looks damaged, I'll bring it to the Apple Store to replace the battery.

さんによる

コメントを追加

回答を追加する

Claudio Sposito さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 8

今までの合計 173