メインコンテンツにスキップ

2013年9月10日に発表されたApple iPhone 5sの修理情報とガイドです。モデル A1533、A1453、A1457、A1528、A1530、A1518。

3530回答 すべてを表示

Error 4013 and error 9 on DFU Mode

Hi All,

I just bought a second hand iphone 5s and update the ios to 10.2. It works fine for almost a day and at the end of the day suddenly the device blank screen and what i did was reboot it as the screen are not coming back after i press power button to awake it. The device will never reboot and stuck at boot logo. Throw me a panic cpu 0 caller kernel panic once before stuck at itunes logo.

Tried to perform itunes restore but keep getting error 4013 on normal recovery mode and error 9 on DFU mode.

Tried to remove front screen assembly and back camera that someone from the answer here suggested but still unable to solve my issue. Any other parts might have cause this? Your suggestion of potential fix are appreciated.

Local device repairer told me might be the u2 flash issue and not worth for a fix as to replace the ic is expensive, is that true?

Thanks

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 1
コメントを追加

1 件の回答

error 9 while in DFU mode means lost connection between PC and device.... I would try replacing the USB cable first... if the issue persists then it should be an issue related to U2, Q2 or Power Manager, depending on measures taken with multimeter along the related voltage lines... I don't know what your local repairer means for "not worth" to repair... Here in Malta where I operate we manage to fix these issues for a maximum 200eur expense... maybe it could be worth for you or not.... in my opinion when a repairer tells you "not worth" without quoting it's because he's not able to fix it... this to encourage you not to give up and search for alternative repairers.... good luck!

このアンサーは役に立ちましたか?

スコア 0

5 件のコメント:

Thanks for your suggestion, i did replace cable, and even use different pc and macbook to restore. Unfortunately the issue persist. Besides this do you think is it possible a faulty battery could cause the issue as i see some of the answer suggested battery might have caused the issue. Also if the u2 or q2 chip change, will it last long or it might easily happen again? Thanks

さんによる

I would definitely try another battery first before thinking of U2 or Q2 chip change.

さんによる

Yes definetely that will be my next try. Thanks

さんによる

Tried with different battery... Too bas the error remains :(

さんによる

I've noticed a lot of 4013 / iOS 10.X questions recently. U2 may fix this problem but it may not. Ask the repair shop if they work on a no fix/no fee basis to minimize your exposure to the costly "i think I can fix it" mentality.

さんによる

コメントを追加

回答を追加する

voonwahwong さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 2,762