I am trying to replace the pick up roller on my printer and have everything figured out except for getting the roller reinstalled.........Terrible situation.
Can anyone provide me with detailed instructions on how to install the roller?
評価: 101.2千
8
173
358
Paul Wilson , Check the video link below for Samsung C460W-CLX3305FW - replacing pickup roller. Good luck.
I hope this helped you out, if so let me know by pressing the helpful button.
このアンサーは役に立ちましたか？
Although the video does a good job of visually showing the procedure it does not clearly show how to reinstall the roller. I am unable to get the roller properly seated on the shaft after cleaning it.
I appreciate the offer of help, Thanks
Paul Wilson, This is the only install procedure I found for your model. Maybe try rotating the roller a little as you push it on the shaft, by the look on the video it may take a little force to push it into position. Good luck.
There is only one correct way that the roller will be reinstalled. Follow the side guide pattern for both sides of the holding plate, once the they are aligned the clips should fall in place. No Force required, you could break the fragile clips otherwise.
このアンサーは役に立ちましたか？
過去 24時間: 0
過去 7 日: 4
過去 30 日: 17
今までの合計 1,900
