修理を始めるには コミュニティ ストア

2012年半ばモデル、A1278/2.5 GHz i5または2.9 GHz i7プロセッサー。

1624回答 すべてを表示

オプション

Battery not charging after changing thermal paste

Hi there!

I have changed the thermal paste and upgraded the RAM of my two MacBook Pro "13 Mid 2012. Everything seems to go OK, except for one of them. After mounting everything in the right place, the computer boots normally, but the battery does not charge. The led in the charger doesn't light. I have checked the battery connection and seems OK, even if I unplug the charger the computer continues running with it charge.

I have also reseted the SMC.

Might I have messed something from the DC IN?

Thank you in advance.

回答がありました！ 回答を表示 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 1
コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順
ベストアンサー

オプション

I realised that I had slightly cut a cable from the jack power board when mounting back the logic board. So, I need to replace this component or maybe do some soldering work.

このアンサーは役に立ちましたか？

はい いいえ
スコア 0
コメントを追加
最も参考になった回答

オプション

No, the DC in board is working perfectly if the computer is turning on. When you say the battery does not charge, do you mean that there is no light on the charger? Does it only stay green? Does OS X show a percentage of the battery?

このアンサーは役に立ちましたか？

はい いいえ
スコア 1

2 件のコメント:

Thank you! The charger light was very weak. OS X showed a percentage of the battery that didn't decrease nor increase. It displayed a "battery not charging" message under the battery menu. I guess that the MacBook wasn't getting power supply enough.

さんによる

did you find the solution of it i am facing the same problem @Enrique Cerrillo Cuenca

さんによる

コメントを追加

回答を追加する

Enrique Cerrillo Cuenca さん、ありがとうございました！
統計データ:

過去 24時間: 1

過去 7 日: 7

過去 30 日: 14

今までの合計 688