Touch id not working after flex cable replacement

Question

iPhone 6 Plus

2014年9月19日に発売されました。この5.5インチサイズのスクリーンをもつiPhoneは、iPhone6の拡大サイズ版です。

1525回答すべてを表示

Andrea G @ubreakibreakmor

評価: 1

投稿日: 2016年11月22日

オプション

Touch id not working after flex cable replacement

Hello,

I recently replaced my LCD and I might have pulled too hard on the flex cable when removing the metal backing plate as when i put the phone back together everything worked except touch id failed. So i ordered a new home button flex cable and when i replaced it, touch id initialized but did not recognize a finger. The fingerprint comes up but does not turn red to recognize my finger. I tried re adjusting the cable but still does not work.

What could it be?

any ideas...?

この質問に回答する同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

コメントを追加

1 件の回答

rayeasom @rayeasom 評価: 1.8千 5 5 1 · Answer 1 · 2016-11-22T01:39:58-07:00

rayeasom @rayeasom

評価: 1.8千

5

1

投稿日: 2016年11月22日

オプション

Touch ID is a complex thing, your phone will only talk to the home button that it came with, install a 3rd party one or damage the home button flex and only Apple can get it working again.

Some third party extension flex (the middle bit behind the metal plate on the screen assembly) are not made to the same standard as the Apple ones, and can cause this problem.

Before buying a new flex cable, check that the Touch ID grounding clip is not damaged and in positioned properly, if this is damaged static build up can stop the Touch ID working properly..

このアンサーは役に立ちましたか？

はいいいえ

スコア 0

コメントを追加

iPhone 6 Plus

Touch id not working after flex cable replacement

1 件の回答

回答を追加する