解決済み: iPad 4 - LCD ribbon cable problem - iPad 4 Wi-Fi

iPad 4 - LCD ribbon cable problem

Hi all,

Today I tried to change my touch screen of my broken iPad. This all went without problems, but when I tried to install everything back, I had problem with installing the ribbon cable of the LCD. As you can see on the photo, the white stripe on the cable is not pushed in enough to work. At the touch cables the white stripe isn't visible, because this one is fitted well.

Why is the cable not going far enough? I don't want to put too much force to it.

Thanks in advance.

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

投稿日: 2016年11月20日

オプション

It might as well be that is sufficiently inside as it is..did you try locking it in place and check if it's firmly connected ? Otherwise there might be some debris to be possibly blown away with some compressed air.

このアンサーは役に立ちましたか？

はいいいえ

スコア 1

2 件のコメント:

Yes I already tried to blow it out, but it looks clean. Also cleaned it with iso. alcohol, but still the same problem.

Uas さんによる2016年11月20日

In my experience, I think the line actually represents how far in the connector needs to go. Looking at your picture, it looks like it is in all the way. Did you replace the digitizer? If so, you could have a bad part.

Carlos Oulman さんによる2020年9月15日

コメントを追加

iPad 4 Wi-Fiモデル

iPad 4 - LCD ribbon cable problem

1 件の回答

回答を追加する