修理を始めるには コミュニティ ストア

モデル番号A1312 / Mid 2010 / 3.2 GHz Core i3もしくは2.8 & 3.6 GHz Core i5もしくは2.93 GHz Core i7, ID iMac11,3

383回答 すべてを表示

オプション

Autumn cleaning disaster iMac mid 2010

Hi guys

I just cleaned my mid 2010 iMac for a first time.

took it all apart cleaned all the parts changed paste on GPU CPU.

And now i have a problems.....

1.Bluetooth doesn't seems to work ( can't connect my wireless keyboard and head phones)

2. in Stat panel I only see CPU Heatsink ( should there be a CPU doe temp??)

3. ODD and CPU fans running full speed ( can not longer control them with FanControl)

On the bright side temps dropped by 10 deg. :D

What would be your "protocol" to undo this disaster ??

Did i connect some sensors plugs inccorectlly ? or it is something more serious?

I would appreciate any help as I am and IT idiot

回答がありました！ 回答を表示 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順
ベストアンサー

オプション

Reconnected bluetooth card, reconnected ambient temp sensor unit seems to work fine now . Big thx to Mayer for help

このアンサーは役に立ちましたか？

はい いいえ
スコア 0
コメントを追加
最も参考になった回答

オプション

What did you do on the hard drive? Was it changed? Check to see if the temperature sensor is fully seated into the logic board. (Either will cause run away fan issues.

Did you remove the battery or replace it?

このアンサーは役に立ちましたか？

はい いいえ
スコア 3

8 件のコメント:

I didn't touch SSD just disconnected from logic. I haven't touched battery. Stranglly after cleaning Mac is running noticeably slower ( lower fps in games) ??

But again Mac is running 10 C cooler with the same settings.

さんによる

Of course it is running cooler the fans are at full speed. Check to see that the sensors are correctly and fully plugged in.

さんによる

they were on full speed before cleaning

さんによる

This machine did not have an SSD. It had a hard drive. Have you changed it?

さんによる

yes but it was done 2 years ago

さんによる

3件以上のコメントを表示

コメントを追加

回答を追加する

dominiku さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 4

今までの合計 143