メインコンテンツにスキップ

2015年9月25日に発売。モデルA1687/A1634。このデバイスの修理は前モデルと似ています。スクリュードライバーとこじ開けるツールが必要です。GSM もしくは CDMA。容量は16、64か128 GB。カラーはシルバー、ゴールド、スペースグレイ、ローズゴールド。

1041回答 すべてを表示

No Service after screen replacement

Hello,

Recently picked up an iPhone 6S plus with a cracked screen. Replaced the screen, put the phone back together, and powered it up. Everything is working, including WIFI antenna, but the phone shows "No Service". The SIM card has been placed into another phone and I was able to make and receive phone calls using the other phone. Even put another active SIM into the "problem" phone and still No Service. It is an unlocked Sprint phone. I've put the phone in "field test mode" and it seems the phone is not able to find a cell tower signal. I've checked the assembly and all plugs and connectors are good. The only issue is that I believe the battery cable was NOT disconnected during the initial disassembly. Thanks for the help!

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

2件の回答

最も参考になった回答

I had the same issue, Try this go into Setting>General>Reset>Reset Network Settings and that should fix it if not try replacing you network antenna.

このアンサーは役に立ちましたか?

スコア 1
コメントを追加

seems lots of people have encountered this problem, have you tried selecting the network manually?

このアンサーは役に立ちましたか?

スコア 1
コメントを追加

回答を追加する

Rob Dean さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 6

今までの合計 1,574