メインコンテンツにスキップ

モデル:CUH-ZCT1は、2013年11月にSony Computer Entertainmentから発売されました。このコントローラはSix-axis、3.7 Vリチウムイオンバッテリーを採用しており、修理は複雑ではありません。

387回答 すべてを表示

Dualshock 4 only works in PS4 safe mode?

I'm having problems with my Dualshock 4 controller.

If it's not plugged in with the USB cable, it does nothing. No lights when I press the PS button.

When I turn on the console, it says connect the controller with the USB cable and press the PS button. When I do that, nothing happens. No lights on the controller and no response from the PS4.

However, when I turn on the console in safe mode, the controller seems to work just fine.

When I try to connect the controller to my PC with the USB cable, it continually disconnects and reconnects.

I have tried 3 different USB cables, including the one it came with. This is the controller that came with the console.

What can I do?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 2

1件のコメント:

have you found a solution for that mate ? because I have this issue too

さんによる

コメントを追加

6件の回答

Might be the bluetooth chipset or the bluetooth antena

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

I think your Bluethoot antenna is broken. I have the same problem, tried with different controllers, and tried my controller on another PS4 without any problem.

Im considering to buy a wired controller, does anybody know if that will work out?

このアンサーは役に立ちましたか?

スコア 0

1件のコメント:

I have the same problem. No solution. Going to the service centre tomorrow.

さんによる

コメントを追加

I need help with this too.

このアンサーは役に立ちましたか?

スコア 0

2 件のコメント:

Hey, any update on if you were able to fix it ? I need help.

さんによる

Yes. I had to mail it to sony. I exhausted all troubleshooting methods.

さんによる

コメントを追加

A wired controller does work. Still can't seem to get a wireless controller to stay connected outside of the safe mode screen.

このアンサーは役に立ちましたか?

スコア 0

1件のコメント:

when you got the wired controller did it work when it asked to connect to a dual shock 4 screen?

さんによる

コメントを追加

I ended up having to mail mine in

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

# First try another controller and see if you still have the same issue. If the issue is still the same with a new controller, then read part two.

  1. If a controller only works in safe mode, this usually is not a controller issue, but instead is a console issue. The PS4 console only reads a controller through the the charge cable in safe mode. When the console is not in safe mode, the console reads the controller through the Bluetooth chip that is soldered onto the consoles motherboard. The only way to fix the issue is to have the consoles Bluetooth chip replaced. This video will help. https://m.youtube.com/watch?v=cTD3jjo1cr...

このアンサーは役に立ちましたか?

スコア 0

1件のコメント:

If it were the bluetooth chip, wouldn't the controller work when plugged in via USB?

さんによる

コメントを追加

回答を追加する

slickstretch30 さん、ありがとうございました!
統計データ:

過去 24時間: 7

過去 7 日: 37

過去 30 日: 166

今までの合計 14,653