Why can't I screw the bottom right P2 screw back in place?

Question

iPhone 5c

2013年9月10日に発表されたApple iPhone 5cの修理情報とガイドです。モデル A1532, A1456

1233回答すべてを表示

Rocco Lorusso @rok

評価: 33

2

投稿日: 2016年6月27日

オプション

Why can't I screw the bottom right P2 screw back in place?

Hi Guys! First of all thanks for all the support this great community provide.

I've got an issue with the loudspeaker of an Iphone 5c I'm fixing - sometimes it stops working- and I hardly suspect this is due to the lack of the bottom right P2 screw, which can't hold in place the speaker onto its contacts.

I've already bought new screws to replace the missing one, but when I've tried to screw it in place, it couldn't fit (I've also tried moving the original left one, into the right hole, but with the same result).

What can I do? Is there a replacing part for the P2 screws housing?

Thank you all!

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

コメントを追加

1 件の回答

ベストアンサー

Ben @benjamen50

評価: 159.7千

Mtwo Perform

11

191

368

投稿日: 2016年6月27日

オプション

Check the front display assembly at the lower part. There are two screw holes for the pentalobe screws. If one or more is missing, the missing sides will just have the screws spinning to nothing.

If they are both there then you will probably need to poke something through a bit then close then put the screen back in place and try again.

There is no easy replacement for the P2 pentalobe screw holes as they are part of the front display screen frame.

このアンサーは役に立ちましたか？

はいいいえ

スコア 2

2 件のコメント:

Thanks for your answer! Is surely helpful :)

Luckly the display assembly seems to be fine, even 'cause the issues still remain without the display assembly...

May it be due to the lightning connector housing? in that case, is there a part just for it, or should I change all the connector?

Rocco Lorusso さんによる2016年6月28日

I doubt the dock connector would be at fault because it shouldn't obstruct where it goes unless the whole phone housing is badly damaged / bent at the bottom part.

Ben さんによる2016年6月28日

コメントを追加

Thanks for your answer! Is surely helpful :)

Luckly the display assembly seems to be fine, even 'cause the issues still remain without the display assembly...

May it be due to the lightning connector housing? in that case, is there a part just for it, or should I change all the connector? — Rocco Lorusso
I doubt the dock connector would be at fault because it shouldn't obstruct where it goes unless the whole phone housing is badly damaged / bent at the bottom part. — Ben

iPhone 5c

Why can't I screw the bottom right P2 screw back in place?

1 件の回答

回答を追加する