The HTC EVO is a Smartphone by HTC powered by a 1-GHz Snapdragon processor and runs the Android operating system.

93の回答 すべて表示

How the heck do I fix the power dongle?

First, thanks for the site - bought a Torx set and got the back of the Evo open. My problem has to do with where the power cord - either a wall adapter or car adapter - attaches to Evo. I don't even know what to call the little piece the adapter slides into. BUT. That particular piece has broken off on my Evo. I can see where it goes, and where the connection points have to meet - but it clearly requires solder to repair. Right now the little metal receptor that is normally IN the phone stays on the end of my power adapter and I use rubber bands and voodoo to keep the charging connection active.

Suggestions? Any way for me to re-secure that thing?

回答がありました! View the answer 同じ問題があります

この質問は役に立ちましたか?

スコア 2

コメント:

I noticed you never got an answer to this. Are you still having this problem?

による

コメントを追加

Pro Tech ツールキットを含むご注文、もしくは総額 $100ドル以上のご注文については送料無料です。

当社のショップを閲覧する

1回答

選択されたソリューション

I imagine you are talking about the power connector, which can be seen in this photo:

http://guide-images.ifixit.net/igi/5WFTB...

... bottom right, immediately below the vibration motor.

It's a surface mount component. If the board where it connects, and the loose power socket, are both undamaged, it probably could be resoldered back on with a hot air gun and a lot of care, much like soldering in SM IC's. A soldering iron will not be able to do this, it will just mess everything up. If you don't have the tools to repair this, a good repair shop could do it for you.

err, here is an amateur showing how it's done.

http://www.youtube.com/watch?v=yhhLyxkTV...

この回答は役に立ちましたか?

スコア 1
コメントを追加

回答を追加する

Rena さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 3,380