メインコンテンツにスキップ

JBL Flip bluetooth speaker.Portable wireless speaker that is great when you are on the go. Released September 14, 2012 *Note not the JBL Flip 2

26の回答 すべて表示

My JBL flip Bluetooth device will not put out no audio

My JBL flip will connect to Bluetooth all of the lights come on everything works except it will not put no sound out it will even not connect to sound when I put the auxiliary cord in it what could be the problem

回答がありました! View the answer 同じ問題があります

この質問は役に立ちましたか?

スコア 11

コメント:

Rodney, with your grammar you don't need to hide from stupid people. You're one of them.

による

コメントを追加

6回答

選択されたソリューション

1. Turn JBL on

2. Press and hold power button until you hear a u familiar beep sound

3. Plug in aux cord to computer and then JBL

4. Then pair jbl to computer/phone and let it play for a few seconds when it's still plugged in through AUX cord

5. Then unplug it aux cord from both devices

6. Let it pair again and there it is. It is now configured into computer and should work

or

Try this answer: Why does my speaker not emit audio?

この回答は役に立ちましたか?

スコア 10

コメント:

did not work for me on flip 4

による

Thank you for your post, while this did not solve my problem in that Win7 is unable to play sound with no AUX port plugged in, it does play with the AUX cable plugged in! - which is more than any other solution that I've looked at. So I'll just use the AUX port.

I am using a JBL Flip 3, with a CRS8510 A10 bluetooth radio. I was unable to make any progress until I installed this driver:

https://www.sevenforums.com/drivers/3387...

Now I am able to play sound, but only through the AUX port. I would say NEVER, EVER buy a CRS bluetooth anything to pair with JBL's equipment.

It's pretty unacceptable that a simple bluetooth radio can't couple with a JBL speaker in 2018, but here we are.

And yeah, I've tried every solution on Google. Like 10 different "solutions" till I found that driver and the AUX suggestion. CRS drivers are garbage off their site.

による

this would be helpful.... but i cant make it past the second step. my jbl 4 does not emit any sound whatsover. not wven the pkwer on button.

による

Im having the same problem!

による

I fixed it by removing device from known bluetooth devices on mac. Restarted Mac paired again and it's working!

による

コメントを追加

My jbl flip 4 suddenly had no sound (no power up sounds either). Charged and paired perfectly but didnt sound. I arrived to this page and tried the different solutions with no luck. Just when I was about to give up I did the following and worked!!

1- Jbl flip turned off.

2- Press power on button but don’t release. Even if light in the button turns on.

3- Keep it pressed til you here the power up sound .

4- Sound is on again!

この回答は役に立ちましたか?

スコア 5

コメント:

Worked perfectly!!!!

による

Worked for my flip 4 as well. Thanks!

による

how long should this take?

による

It didnt work when i turn on my speaker it deosnt make a sound not even when i tried ur method for a long time

による

thankyouuuu!!

による

コメントを追加

My JBL Flip 4 was working fine one afternoon..The light which displays the remaining battery stayed on even if the speaker was turned off..later it stopped emitting any sound even though it connected to my phone very easily (via Bluetooth,or even AUX).I tried everything like resetting the speaker by pressing the 'Volume Up' and 'Play' buttons together. After all the annoying problems I just pressed the power button for around 10-15 seconds while the speaker was on and it turned off. Later I just tried turning the power on and voila!The sound was back!Try it out..

この回答は役に立ちましたか?

スコア 1

コメント:

tried this on my flip 4. dosent work at all. ..

による

Thank you! this worked for me!

による

コメントを追加

Open up the JBL Flip 4 and press firmly on the square on the PC board (called a dark choke)... if it is loose, make sure it is firmly soldered. Your Flip 4 should then have sound, as this is a common fault throughout the Flip series. So, don't give up, try it.. you never know. :)

この回答は役に立ちましたか?

スコア 0

コメント:

how do i open up the jbl flip 4?

による

yes how do we open it up

による

コメントを追加

JBL Link 20

tuned off the unit, using the mike button, ( top side) then turn it back on, same button

then pressed the middle button (top) hold down and

say "pair device" or "pair"

go to to your blue tooth settings then, when prompted, and select the JBL speaker

この回答は役に立ちましたか?

スコア 0
コメントを追加

After trying all of the above fixes, I removed the JBL speaker from my computer and made the speaker discoverable again. When it showed up on my computer I selected it and told it to allow the pairing and it immediately played dropping the speaker on the computer so all good. I guess the moral is start all over again if your previous connections isn’t working!

この回答は役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Rodney Brockwell さん、ありがとうございました!
統計データを表示:

過去 24時間: 106

過去 7 日: 699

過去 30 日: 3,752

今までの合計 81,406