メインコンテンツにスキップ

The economical version of the Samsung Galaxy S4, released in July 2013.

110の回答 すべてを表示

Screws not fully screwing in after re-assembly

I had a S4 Mini with a blown out speaker. I opened it up, replaced the part, and re-assembled it. The problem is that the screws in the top left and bottom right corner won't screw in all the way.

I have another S4 Mini to compare it to, and I cannot see any visual difference in how the device's front bezels are attached. Did I mess up somehow at re-assembling the device?

回答がありました! View the answer 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

Android 修理キット

交換用スクリーンやバッテリーの修理キット

ショップを見る

Android 修理キット

交換用スクリーンやバッテリーの修理キット

ショップを見る

1 件の回答

選択されたソリューション

I don't have an S4 Mini in front of me...and I hate to ask something obvious, but are the screws all the same length? It's a common enough problem on device re-assembly that it's worth checking.

この回答は役に立ちましたか?

スコア 1

コメント:

Judging from some S4 Mini repair videos I've seen, they don't seem particularly concerned with the screw lengths.

by

OK, try backing them out. It's possible that the body and the bezel are slightly misaligned and therefore the threads in the bezel aren't engaging with the screw.

by

Yeah, I looked in the screw hole ,and it's misaligned. I will have to unscrew everything, take the front off again, and try to re-seat it better. Thanks.

by

コメントを追加

回答を追加する

Christopher Emirzian さん、ありがとうございました!
統計データを表示:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

今までの合計 70