New Screen Cover Not Sticking

Question

iPad 2 Wi-Fiモデル EMC 2560

2012年3月に発売されたオリジナルiPad2の改良版モデルです。より小さくなったダイプロセッサと再デザインされた内部構造が特長です。修理にはヒート(熱)を当てて、十分注意しながらこじ開けて行く作業が必須です。

73回答すべてを表示

締切られた回答

Sccoaire @sccoaire

評価: 33

2

3

投稿日: 2015年11月1日

オプション

New Screen Cover Not Sticking

Hi, I replaced the volume/audio ribbon and dock connector in my iPad2. After finishing everything and putting the new glass cover, everything worked great, looked great, was happy. But I noticed that after a short while, the edge of the glass cover is peeling off and separating from the edges (pic).

The new screen had pre-applied 3M 300LSE tape. I really don't want to risk removing the screen and breaking it... what are my options?

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

コメントを追加

1 件の回答

ベストアンサー

XTerminal @xterminal

評価: 1.5千

10

9

投稿日: 2015年11月1日

オプション

That tape is useless try using this instead Red Tape you wont break the screen if you use that 3M 300LSE tape you applied use a heat gun to remove the screen you will be fine.

このアンサーは役に立ちましたか？

はいいいえ

スコア 2

2 件のコメント:

Thanks for this. Will try to find locally, not sure if I can. All these shipping charges and exchange rates is adding up!

Sccoaire さんによる2015年11月1日

Finally got the 5mm red tape. I didn't need to use the heat gun to remove the screen, it popped right out (that adhesive was very cheap indeed). Applied the red tape, left overnight and glass was still as it should this morning. Winner. Smartcover sensor not working, but I can do without.

Sccoaire さんによる2015年11月10日

コメントを追加

Thanks for this. Will try to find locally, not sure if I can. All these shipping charges and exchange rates is adding up! — Sccoaire
Finally got the 5mm red tape. I didn't need to use the heat gun to remove the screen, it popped right out (that adhesive was very cheap indeed). Applied the red tape, left overnight and glass was still as it should this morning. Winner. Smartcover sensor not working, but I can do without. — Sccoaire