メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

Repair guides and support for electric and gas powered high pressure sprayers, sometimes known as power washers.

31回答 すべてを表示

Simoniz pressure washer leaking from gold spring thingy

Hi there I have a pressure washer that's leaking water out of a gold spring thingy I'm not sure what it is or how to fix it any help would be appreciated

Update (10/08/2015)

Block Image

Gold spring thingy

Block Image

Block Image

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 2

コメント:

Can you elaborate? Could you provide us with a manufacturer, model number, or year? What is the "gold springy thingy?"

さんによる

コメントを追加

3件の回答

最も参考になった回答

Hi Mike - That gold springy thing is the adjustment spring for the unloader valve. It makes it so water flows even when the trigger isn't in use. This keeps the pump from running dry. Inside the spring is the adjusting bolt. You should be able to tighten and loosen the bolt to adjust the unloader pressure. I would assume these things were done in the factory before shipping to you but possibly you may need to loosen off the nut to stop the leak. Another possibility is an o-ring/nut has cracked where the water is leaking through. All in all this is definitely something that would be covered under warranty.

Sources for further reading:

http://www.ppe-pressure-washer-parts.com...

http://pressurewashr.com/pressure-washer...

http://www.epowerwash.com/wp/archives/63...

このアンサーは役に立ちましたか?

スコア 2
コメントを追加

Hi Mike - That gold springy thing is the adjustment spring for the unloader valve. It makes it so water flows even when the trigger isn't in use. This keeps the pump from running dry. Inside the spring is the adjusting bolt. You should be able to tighten and loosen the bolt to adjust the unloader pressure. I would assume these things were done in the factory before shipping to you but possibly you may need to loosen off the nut to stop the leak. Another possibility is an o-ring/nut has cracked where the water is leaking through. All in all this is definitely something that would be covered under warranty.

Sources for further reading:http://pressurewashr.com/pressure-washer...

このアンサーは役に立ちましたか?

スコア 2
コメントを追加

Hi, Mike. That's a Great question . This keeps the pump from running dry.It makes it so water flows even when the trigger isn't in use. Even I appreciate with @jamar . Aslo Tnq @jamar for providing your valuable opinion . Thanks to all. Washer Daddy

このアンサーは役に立ちましたか?

スコア 2
コメントを追加

回答を追加する

mike さん、ありがとうございました!
統計データを表示:

過去 24時間: 3

過去 7 日: 17

過去 30 日: 88

今までの合計 2,356