評価: 13
1
1
Can barely make out images on laptop screen. Screen displays fine on external monitor. Thought it was the inverter board, so replaced, but same problem. Replaced logic board, still same problem. Any ideas? Brightness is whole way up.
この質問は役に立ちましたか？
評価: 78.2千
384
96
162
If I read you correctly you have replaced the inverter board and the logic board. The unit functions well with an external monitor. It would seem that leaves only the cable from the logic board to the inverter board or the LCD itself. I would try the cable as the lower cost part first. I am including the link for replacing the LCD but hope you won't need it. Good luck Ralph
このアンサーは役に立ちましたか？
+
評価: 685.2千
3.4千
1.1千
2.6千
There's only the LCD & the Display Data Cable (LVDS) left and it doesn't sound like the cable.
このアンサーは役に立ちましたか？
I've got to learn to type faster. + Ralph
過去 24時間: 0
過去 7 日: 0
過去 30 日: 1
今までの合計 1,333
