メインコンテンツにスキップ

The Samsung Galaxy S3 is a multi-touch, slate-format smartphone with eye-tracking ability, increased storage, and a wireless charging option.

459回答 すべてを表示
締切られた回答

Soft key pressure affects screen, makes screen flicker and turn off

When powering up my phone, sometimes the screen comes on and sometimes it does not. If I keep squeezing the soft key area, eventually the screen comes on. Even after the screen is on (and fully functional), if I push on the soft keys too hard, the screen will flicker and sometimes go off. Also after screen timeout, the screen will usually not come back on without squeezing the area of the softkeys randomly. I have not dropped the phone. Any idea what to check?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

Well if you can take it apart following the guide I would first check to make sure make screen was connected aka the ribbon cable to the mother board. If they are and you disconnected them and reconnected them and it still doesn't function properly. I would replace the screen. But that might not help it could be the system board

このアンサーは役に立ちましたか?

スコア 0

2 件のコメント:

I will do as you suggested, clean and reconnect the ribbon cable to the motherboard and report back. I am concerned about replacing the most expensive item and it not being the problem. Do you know if a repair store would be able to tell which is causing the problem. Thanks for your response.

さんによる

I followed your online guide and took the motherboard off the phone, cleaned all the connections with rubbing alcohol, put the phone back together and IT WORKS! Thanks for the great website and tips.

Regards,

Duane

さんによる

コメントを追加
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 97