評価: 35
3
1
The Black hinge cover is damaged and when i touch my screen to move it to a different position it wobbles back to the original.
It is not under warranty and I'm looking to do it myself if possible.
この質問は役に立ちましたか？
評価: 685.3千
3.4千
1.1千
2.6千
Go through this guide and look especially at step #13. MacBook Pro 13" Unibody Mid 2012のディスプレイの交換
There are 3 screws on each hinge that you need to check and possibly tighten.
このアンサーは役に立ちましたか？
Thank you I'll try it out. I start from the beginning i presume?
No, just open it up and go straight to the screws. Be careful that the screen is aligned before you lock it place. Do one screw at at time, then check it. Check to see if any are loose, do one on the right then one one the left checking to see if it closes correctly. The first two you tighten will probably lock it down.
評価: 1千
8
8
2
I found this online and it may help resolve your issue
このアンサーは役に立ちましたか？
Thank you for your effort ,but my mackbook pro model doesn't look like beneath the casing.
過去 24時間: 2
過去 7 日: 6
過去 30 日: 9
今までの合計 14,841
3 件のコメント
What are the last 4 figures of your serial number?
mayer さんによる
The last 4 are DTY4.
Ali さんによる
Apple MacBook Pro "Core i7" 2.9 13" Mid-2012 Specs
Identifiers: Mid-2012 13" - MD102LL/A - MacBookPro9,2 - A1278 - 2554*
mayer さんによる