評価: 121
2
2
1
I was following ifixit steps to check the functionality of the hold button (diagnostic). The hold button is working fine (0 and 1). But now my screen is stuck on HP Detect : 0. It says press menu to continue, but when I press menu nothing happens. I have also tried pressing menu twice and several other combinations...
評価: 121
1
1
Plug in the headphones (HP).
このアンサーは役に立ちましたか？
...........Hmmmmmmmn? Something about hindsight, and 20x20 eyesight....?!
Thanks!
so i should put my HP laptop away ?
i plugged the earphones. it says now hp detect : 1 menu to continue. i pressed menu but it does not continue.. can you please help?
any clue please e mail me at bernard_khoury@hotmail.com
このアンサーは役に立ちましたか？
just take out the headphones and press the menu button then BINGO!!!
Now it says 'Accessories Test'
FW_DETECT = 0
USB_DETECT = 1
Please plug FW
What's this mean????
Firewire (FW) connection vs USB connection:
Turn off hold button
評価: 121
1
1
If it's not continuing, it didn't pass the headphone (HP) test. Ipods have a little detector that stops the ipod if a headphone isn't detected; it'll pause the song if the headphone jack is removed.
You might want to disassemble it and replace the headphone jack. If that doesn't work, it's probably a bad board.
このアンサーは役に立ちましたか？
after plugging it in, unplug it, then it should continue
評価: 13
1
I got mine to go to the next stage by clicking the hold switch on and then off.
このアンサーは役に立ちましたか？
Now it's stuck on FW DETECT : 0
There's no Firewire to plug in, so I can't test this.
過去 24時間: 1
過去 7 日: 29
過去 30 日: 178
今までの合計 28,463
1件のコメント
—me to. have no idea why. it reboots fine -wasn't doing this a week ago.
BixLives32 さんによる