修理を始めるには コミュニティ ストア

2012年9月12日に発表されたApple社による6番目となる iPhone。このデバイスの修理方法は前モデルと類似しており、スクリュードライバーと開封工具が必要です。GSMかCDMA方式、16/32/64 GB。 本体色は黒と白。

2522回答 すべてを表示

オプション

How to replace/desolder iPhone 5 SIM card reader?

Hello,

My iPhone 5 always seems to say "No SIM" even when inserting several SIM cards and cleaning the tray and internals. I strongly believe this is a SIM card reader fault, hence please may I ask how I would do about de-soldering and soldering on a new SIM card reader on the iPhone 5?

I looked at several resources online and they have given me a general idea since there aren't many guides online, hence could I please ask you guys for more specifics on how-to? I apologise for the bother.

Thank you ever so sincerely! :)

回答がありました！ 回答を表示 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 8
コメントを追加

6件の回答

フィルタ：
参考になった順 新しい順 古い順
ベストアンサー

オプション

Alright, I guess I'm gonna throw my hat into this crisis of misinformation. So, OP, if you don't have a smd work station and experience in soldering, this is not for you. What you should do is look into a GOOD board repair shop that can do this, and if that's worth getting a used iPhone 5. The phone that's next on the list to become extinct. Sounds like a $75 purchase on Craigslist. This particular repair would be difficult, especially because of the plastic components. I do have a technique for this, but still, not easy. Not for a beginner for sure. The only person who made an ounce of sense was that David F guy. The rest are not things that remotely make sense

このアンサーは役に立ちましたか？

はい いいえ
スコア 1
コメントを追加
最も参考になった回答

オプション

It is not an easy task the problem are the 2 solderpads hidden under the sim contact made in a plastic frame

このアンサーは役に立ちましたか？

はい いいえ
スコア 3
コメントを追加

オプション

If you have to ask i don't think you will be able to do it, it's not easy to resolder such a tiny component. My bets advice to you is get an old circuit board, I use a RROD Xbox 360 and practice soldering onto it.

このアンサーは役に立ちましたか？

はい いいえ
スコア 1
コメントを追加

オプション

https://www.youtube.com/watch?v=7o6f_zq2...

This video showed it pretty good for me atleast! Hope you all the best!

このアンサーは役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

オプション

That video didn't show how to do anything. However, I just started looking into this but I imagine you wouldn't actually "solder", you'd use a heat gun. Any time there's multiple solder points, it's usually best to use a heat gun to soften the solder.

このアンサーは役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

オプション

I suggest to bring the unit to iPhone service center and let them fix it for you.they were more competent than us since it was their kind of job

このアンサーは役に立ちましたか？

はい いいえ
スコア 0

2 件のコメント:

How much would that cost?

さんによる

They don't microsolder at Apple. They sell you a new phone

さんによる

コメントを追加

回答を追加する

Arif Ullah さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 6

今までの合計 24,866