Repair and disassembly guides for Kenmore Microwaves.

149の回答 すべて表示

turns on when door is open

working fine one minute, then after I'd removed food, it turned ON when I opened the door. Will not work with the door closed. Unplugged, pressed "stop", "clear", tried everything. But continues to work backward. (On when open, OFF when closed). It's less than 2 years old!

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0

コメント:

kathy, did this happen all of a sudden or was there any previous repair involved?

による

コメントを追加

Pro Tech ツールキットを含むご注文、もしくは総額 $100ドル以上のご注文については送料無料です。

当社のショップを閲覧する

3回答

最も参考になった回答

This thing is very dangerous, especially if you have any children in the house. This sounds like a control board issue but the risks involved in repairing it are not worth it. These things are cheap, trash it before it harms someone and get a new one.

この回答は役に立ちましたか?

スコア 1
コメントを追加

I had the same problem, What I had to do is go to options and change everything to off and then put them back to what you want Exp: sound to off and then put it back to on ect. I did this and now it works fine.

この回答は役に立ちましたか?

スコア 1
コメントを追加

This fault is cheap repaire if you try

Check relay on the control board, mostly the contacts on the relay are carbonised and get attached together so when the oven shakes like you open the door the contact is present in the relay and the microwave starts.

Its best you replace the relay.

Next you need to check the three door latch switches open one by one and service them.

Any enquiries contact

Ashwin

この回答は役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

kathy さん、ありがとうございました!
統計データを表示:

過去 24時間: 3

過去 7 日: 31

過去 30 日: 155

今までの合計 6,558