評価: 13
1
Hello
I have an iphone 5 which is water damaged
I've soaked it into a bath of isopropyl alcohol during a night
After drying
i've tried to test it but nothings happened
only the motherboard is heating up..
Could you help me ?
この質問は役に立ちましたか？
評価: 30.6千
25
71
41
heat = a short on the board.
You need to desolder the EMI shields in order to expose most of the board. Find the components that are oxidized--reflow the solder on those components and replace those that are damaged.
clean flux, wash again, dry, assemble with new battery into a test housing and see what you get.
If this isn't feasible, then send it out for a professional water damage repair---be sure to ask if the company plans to follow the steps outlined above, otherwise it will be the same as you've already done.
jessa
このアンサーは役に立ちましたか？
You're right
I haven't desold the EMI shields
i think too that i have oxidized components under the shields
tomorrow I'll try to do that
hope that it will work !
thank's
過去 24時間: 0
過去 7 日: 1
過去 30 日: 3
今までの合計 450
