blank screen and bong noise after replacing power flex cable

Question

iPhone 5

2012年9月12日に発表されたApple社による6番目となる iPhone。このデバイスの修理方法は前モデルと類似しており、スクリュードライバーと開封工具が必要です。GSMかCDMA方式、16/32/64 GB。本体色は黒と白。

2522回答すべてを表示

締切られた回答

Hai Nguyen @hainguyen11649

評価: 11

投稿日: 2014年3月1日

オプション

blank screen and bong noise after replacing power flex cable

I just replaced the power flex cable on my iPhone 5 and after reassembling everything, the phone will not power on. I can connect the charger cable to it and it seems like it's on because I can hear a bong noise occur every 5 seconds. The screen is blank and the battery gets very hot while it's plugged in. I have tried to take everything apart and reassembled everything again and still the same problem.

One thing I do notice is that when I took the battery out the first time, I kind of bent it while I was trying to pry it off. I'm not sure if that has anything to do with it. Any help is appreciated.

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

コメントを追加

3件の回答

ベストアンサー

con @con82159

評価: 37.6千

IRepair iphones

22

51

42

投稿日: 2014年3月1日

オプション

Plug device in to computer does iTunes recognise it? This will tell you if it's going to mail screen.

Blank screen could indicate damaged cables make sure u have the seeded correctly press firm in the centre to insure a firm fit.

Battery could be a issue but the screen should still acctivate !

このアンサーは役に立ちましたか？

はいいいえ

スコア 1

3 件のコメント:

I plugged it into my laptop and iTunes does recognize it. Do you think it's a problem with the LCD? I did kind of tug on the cable a little hard at one point when I was prying the LCD open.

Hai Nguyen さんによる2014年3月1日

Yes that could be it unfortunately you will need to get another screen to see if that's the problem

con さんによる2014年3月1日

You are right. I checked the LCD screen one more time and it looks like I tore the digitizer cable by accident.

Hai Nguyen さんによる2014年3月1日

コメントを追加

I plugged it into my laptop and iTunes does recognize it. Do you think it's a problem with the LCD? I did kind of tug on the cable a little hard at one point when I was prying the LCD open. — Hai Nguyen
Yes that could be it unfortunately you will need to get another screen to see if that's the problem — con
You are right. I checked the LCD screen one more time and it looks like I tore the digitizer cable by accident. — Hai Nguyen

jonnyblue @jonnyblue 評価: 13 1 1 · Answer 1 · 2014-03-05T04:33:03-07:00

jonnyblue @jonnyblue

評価: 13

1

投稿日: 2014年3月5日

オプション

I got the same problem after replacing the power button flex cable. But sometimes the LCD would come on but then the digitiser would not respond to touch.

I tried replacing the display assembly with a tested original one which I'm sure it works ok but no luck.

Any other suggestions?

このアンサーは役に立ちましたか？

はいいいえ

スコア 0

コメントを追加

Sophia @sophia37481 評価: 1 · Answer 2 · 2014-10-13T08:09:13-07:00

Had a similar problem bought a faulty iphone 5s off ebay was supposed to be a battery connector fault the phone arrived in pieces with parts missing and the battery connector ripped off the board :( after repairing the battery connector and piecing the phone back together. I had the bong noise when it was plugged in.

Tried various things to sort this took it all apart and put it back together again no luck cleaned the charge port etc etc.

Eventually as I was going to replace the charge port anyway i gentry scraped the inside with a hook earring. suddenly I had life. I believe there must have been a short. I don't recommend an earring of course but try replacing the charge port. the bong for me was the cable not getting a connection my battery was completely flat as soon as i got a proper connection the phone started charging.