修理を始めるには コミュニティ ストア

モデル番号A1286、発売日 2011年2月/2.0, 2.2もしくは2.3 GHzクアッドコアIntel Core i7プロセッサ

586回答 すべてを表示

オプション

Broken power connector for speakers on logic board

After reassembling everything after cleaning up from a liquid spill, I managed to break the connector on the logic board that attaches to the red and black speaker cable.

Would this be fixable by re-soldering the connector (the individual pins look extremely small)? If not, I'm not too concerned about having sound. My next question would be, is it safe to wrap the connector in electrical tape and run the laptop like normal?

Here's iFixit's image of the cable & connector:

Block Image

Here's my cable & connector in its current state with a screwdriver pointing to where it should be.

Block Image

回答がありました！ 回答を表示 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順
ベストアンサー

オプション

Generally, unless you are in the computer/small electronics business, logic board component soldering is not a DIY project. It requires special tools, solder and lots and lots of practice (it's easy to destroy MLBs with too much heat).

A small electronics/computer repair shop might be able to do this for you.

A workaround would be to use a USB audio adaptor or USB voice quality headset & microphone. USB audio works separate from analog audio.

If this answer is acceptable please remember to return and mark it.

このアンサーは役に立ちましたか？

はい いいえ
スコア 2
コメントを追加

オプション

I actually did this myself. I was repairing my gpu and broke the connector off. Whoops.

I was able to successfully pull the individual wires from the connector, snap the ends and solder them directly to the logic board. I then used nail polish to insulate all around the joints, because it looks sketchy and I didn't have liquid electrical tape.

I used a super cheap and janky soldering iron to do it, too. To be fair though, I have a good amount of experience soldering small electronics. It was definitely a stressful job. But I needed a quick fix.

このアンサーは役に立ちましたか？

はい いいえ
スコア 2

3 件のコメント:

I used a Bluetooth speaker...

さんによる

I just did this. And am about to learn how to solder right about now.

さんによる

@steve w i am too but %#*@ if its that easy why not fix it.

さんによる

コメントを追加

回答を追加する

Patrick さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 2

今までの合計 1,702