評価: 1
2
My lock/power button stopped working so I ordered a new cable and button. Spent 3 hours painstakingly installing the new cable tonight, and now the lock/power, mute/ringer, and both volume buttons are all not working. They all have a physical "click" but no response. Clearly i did something wrong. Thoughts?
この質問は役に立ちましたか？
評価: 1
2
Turns out I had the connector under the motherboard. Wasn't even connected! Working properly now! Thanks for your help.
このアンサーは役に立ちましたか？
評価: 727
3
1
If you make sure the new cable is good, you can check the connector between the cable and the mother board. May be you loosed the connectors carelessly.
このアンサーは役に立ちましたか？
Is that the one shown here? http://d3nevzfk7ii3be.cloudfront.net/igi...
評価: 727
3
1
There are three points you need to check.
First, you need to check whether the cable is broken or not .
Second, if the cable is in good condition, you need to check the installed position is correct.
Third, if the position you installed is correct, you need to check the connector.
To know more about the cable or get a new cable, click here : http://bit.ly/1gbvVHI .
Hope will help you.
このアンサーは役に立ちましたか？
過去 24時間: 0
過去 7 日: 0
過去 30 日: 0
今までの合計 139
