メインコンテンツにスキップ

changed lcd digitizer and data cable, still no fix for screen blackout

Hey guys,

I followed the manual to fix and change over the lcd digitizer and the display cable, but i still have the same problem. Whenever i set the display brightness past 4 levels, the screen will eventually go black and i will have to lower them to 1 then set it back under 4 levels. Would anyone know what else could be the problem? (i also fitted the cables in nicely, so i don't believe that it the cause).

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア -1
コメントを追加

1 件の回答

選択されたソリューション

The only thing left is your LCD I believe that the backlight is failing... replacing the backlight is a very advanced DIY project Replacing the entire LCD is difficult but not so nearly impossible for a DIYer.

Check on price and availability to determine if it's economically feasible to replace the screen.

If this Answer is helpful please remember to return and mark it Accepted.

このアンサーは役に立ちましたか?

スコア 1

コメント:

so what exactly would i be replacing? the lcd as a whole or a specific part of the lcd?

さんによる

Easiest DIY fix - replace the LCD (backlight included). While it is possible to replace only the backlight it is a very advanced DIY project.

さんによる

so just wondering where would i find out how to do the advanced way diy of the lcd? im sure i'd be capable if i had a guide to follow

さんによる

Did you bother to look at the guide? There is a graphic on the right side just under the banner head.

さんによる

コメントを追加

回答を追加する

KmkZ さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 188