修理を始めるには コミュニティ ストア

iPhoneの5代目となるiPhone 4S。このデバイスの修理は比較的簡単で、スクリュードライバー、開口ツールと忍耐が必要です。GSM/CDMA / 16, 32, 64 GB / 白と黒

2201回答 すべてを表示
締切られた回答

オプション

Sleep/wake button and digitizer not working after screen replacement

Ok folks, this is an iPhone 4S working on AT&T. Screen cracked. Bought a replacement, this one:

http://www.amazon.com/gp/product/B0068PR...

Replacement was uneventful (I've done it about 6 times in the past), used ifixit directions. No problems during repair from what I could tell.

When I get it all back together, I notice that 1) the sleep/wake button does nothing and 2) the digitizer doesn't work (i.e., the screen turns on fine with home button, but there's no touch response whatsoever).

I've tried restore via iTunes, seemed to work normally, but no change afterward. Running latest OS (6.1.2 is it?). Can't do a hard reset without a sleep/wake button.

Any help would be greatly appreciated! Thank you!

回答がありました！ 回答を表示 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順
ベストアンサー

オプション

As I see it three things could have happened:

1) You've damaged the power button flex cable. (Most likely)

2) The flex cable isn't properly connected.

3) You've damaged the logic board. (Let's hope not)

As for the digitizer, the digitizer flex cable has probably been damaged during install or you've received it faulty.

このアンサーは役に立ちましたか？

はい いいえ
スコア 2

2 件のコメント:

+ I'd go with "you've received it faulty"

さんによる

Just wanted to bring some closure to this: I opened up the phone and realized that I had indeed ripped the digitizer ribbon. And the reason the power button wasn't working is that I hadn't connected the power button cable. Duh! Thanks for your help!

さんによる

コメントを追加

オプション

Here's a photo of the ripped digitizer ribbon cable. When they say to be careful, they aren't joking! :-)

Thanks again.

このアンサーは役に立ちましたか？

はい いいえ
スコア 0

1件のコメント:

You're very welcome :)

さんによる

コメントを追加
統計データ:

過去 24時間: 0

過去 7 日: 7

過去 30 日: 8

今までの合計 1,427