メインコンテンツにスキップ

5th generation of Toyota's modern full-size sedan.

81の回答 すべて表示

Why won't my sterio work?but did before?

i put a cd player in my car before and switched it out for a newer cd player.now that i put a new one in it won't work.i double checked to make sure all wires where right and fuses...What else could it be for it not to work?

回答がありました! View the answer 同じ問題があります

この質問は役に立ちましたか?

スコア 1

コメント:

Is it an aftermarket stereo or a Toyota brand? Do you use an amp with it? What was the issue with the old one? You just replaced it to go with a newer player?

による

i just replaced the stereo for a newer one. there is no amp connected.ok i will check the wires again..thank u both very much

による

コメントを追加

1回答

選択されたソリューション

First thing I would do is test the power wire to the stereo with a volt meter and see if you are getting 12 volts from it and at the same time make sure the Ground source is also working, if that is good I would look for a fuse that is in the stereo itself and see if it's good, if that's all good then I would have to think the stereo may be bad.

この回答は役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

gamesnotwar さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 3

今までの合計 302