LCD Stress pressure marks after installing a replacement screen

Question

iPhone 4

iPhoneの第4代目で、修理はそのままパーツを直接交換するだけです。しかし、正面ガラスとLCDはセットで交換する必要があります。容量はGSM / 8,、16m32 GB / モデル番号 A1332 /本体カラーは黒と白色

2375回答すべてを表示

Robert G @robergza

評価: 917

MS Solutions

9

20

2

投稿日: 2012年12月5日

オプション

LCD Stress pressure marks after installing a replacement screen

I had bought several lcd + digitizer replacements from different seller around eBay. Some of them send good lcd + digitizer replacements and after several purchases some lcd + digitizer replacements have this flaw when applying a little pressure around the lcd + digitizer replacement.

And is that after installing them they will show some stress marks on top and bottom of the lcd + digitizer replacement when applying a little bit of pressure. (Pic Related)

How can I know that a LCD is bad without installing them. I buy bulk orders from time to time since i own a repair shop.

Or anyone has a way to solve this issue?

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

1件のコメント

By the way Robert where do you get your Bulk orders ? I have a repair shop too and do the same .

Mitch Rush さんによる2012年12月5日

コメントを追加

2件の回答

ベストアンサー

Kevin @kevin11181

評価: 43

2

1

投稿日: 2012年12月5日

オプション

This has to do with not correctly cushioning or applying adhesive to the underside of the screen. Mine does this as well and it is a common error when doing it. To get it done correctly try using a small amount of tape and super glue to hold the screen down.

このアンサーは役に立ちましたか？

はいいいえ

スコア 1

1件のコメント:

Hi Kevin,

Do you mean using tape/super glue during the application of glue or after (when the marks are present)?

How would you suggest avoiding this error when applying the glue?

Thanks so much h!

Prisha さんによる2016年6月22日

コメントを追加

By the way Robert where do you get your Bulk orders ? I have a repair shop too and do the same . — Mitch Rush
Hi Kevin,

Do you mean using tape/super glue during the application of glue or after (when the marks are present)?

How would you suggest avoiding this error when applying the glue?

Thanks so much h! — Prisha

Mitch Rush @mitchrush 評価: 5.6千 6 3 4 · Answer 1 · 2012-12-05T18:27:43-07:00

Mitch Rush @mitchrush

評価: 5.6千

6

3

4

投稿日: 2012年12月5日

オプション

Robert there is a way to test an LCD Digitizer without installing it, first, remove the back cover of your phone, then remove the steel cover plate that covers all of the ribbon cable connection points at the top by the camera, unplug the LCD Digitizer connections and carefully move them out of the way far enough to plug in and test the new LCD Digitizer, there is a (jumper) Ribbon cable made that makes this process much easier, https://www.gounlock.com/details.php?ite... I use it to test every screen before installation !

このアンサーは役に立ちましたか？

はいいいえ

スコア 0

コメントを追加

iPhone 4

LCD Stress pressure marks after installing a replacement screen

2件の回答

回答を追加する