メインコンテンツにスキップ

iPhoneの第4代目で、修理はそのままパーツを直接交換するだけです。しかし、正面ガラスとLCDはセットで交換する必要があります。容量はGSM / 8,、16m32 GB / モデル番号 A1332 /本体カラーは黒と白色

3278の回答 すべて表示

Replaced Proximity sensor cable no power

My iphone power button had worn out and had become very stiff to press so I took it apart, and identified the power button was missing the black nub. So I ordered a new power and proximity sensor cable.

I followed the guide on Ifixit to replace the cable and put the phone back together carefully making sure all the cables were in correctly. I tried turning on the phone and there was no power at all, even with the charger in.

I tried charging the phone for a few hours and still got nothing. I then took the phone apart again and looked at the cables at the top, as soon as I unplugged the new proximity sensor cable the phone randomly powered up and worked fine apart from the sleep/wake button and proximity sensor. Every time I plug the proximity cable in I get nothing the phone will not turn on but as soon as I unplug it the phone powers up every time.

Does anyone have any ideas what is wrong?

回答がありました! View the answer 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1回答

選択されたソリューション

Only thing I can think of is the power button bracket is tightened too much and constantly holding in the button causing problems. I guess a short of some sort in the ribbon cable could do it as well.

この回答は役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Nick さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 435