If the MagSafe cord LED is not lighting that’s a sign the systems MagSafe connector needs cleaning or replacing. Review this Apple T/N [https://support.apple.com/en-us/HT203207|Apple Portables: Troubleshooting MagSafe adapters] Jump down to point #7
+
If the MagSafe cord LED is not lighting that’s a sign the systems MagSafe connector needs cleaning or replacing. Review this Apple T/N [link|https://support.apple.com/en-us/HT203207|Apple Portables: Troubleshooting MagSafe adapters] Jump down to point #7
-
Here’s the needed MagSafe connector for you system [product|IF117-001-2]. You could also have a bad I/O cable as the power goes to the I/O board and then through the I/O cable to the main logic board [product|IF117-017]
+
Here’s the needed MagSafe connector for you system [product|IF117-001-2]. You could also have a bad I/O cable as the power goes to the I/O board and then through the I/O cable to the main logic board [product|IF117-017] Follow this guide [https://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Retina+Display+Mid+2012+MagSafe+DC-In+Board+Replacement/9729]
If you disconnect your battery your MagSafe charger should be able to run your system.
If the MagSafe cord LED is not lighting that’s a sign the systems MAgSafe connector needs cleaning or replacing. Review this Apple T/N [https://support.apple.com/en-us/HT203207|Apple Portables: Troubleshooting MagSafe adapters] Jump down to point #7
+
If the MagSafe cord LED is not lighting that’s a sign the systems MagSafe connector needs cleaning or replacing. Review this Apple T/N [https://support.apple.com/en-us/HT203207|Apple Portables: Troubleshooting MagSafe adapters] Jump down to point #7
Here’s the needed MagSafe connector for you system [product|IF117-001-2]. You could also have a bad I/O cable as the power goes to the I/O board and then through the I/O cable to the main logic board [product|IF117-017]
-
If you disconnect your battery your MAgSafe charger should be able to run your system.
+
If you disconnect your battery your MagSafe charger should be able to run your system.
If the MagSafe cord LED is not lighting that’s a sign the systems MAgSafe connector needs cleaning or replacing. Review this Apple T/N [https://support.apple.com/en-us/HT203207|Apple Portables: Troubleshooting MagSafe adapters] Jump down to point #7
Here’s the needed MagSafe connector for you system [product|IF117-001-2]. You could also have a bad I/O cable as the power goes to the I/O board and then through the I/O cable to the main logic board [product|IF117-017]
If you disconnect your battery your MAgSafe charger should be able to run your system.