現在のバージョン作成者： Dan （投票の詳細）

タイトル:

Try to swipe nand chip on working PCB

テキスト:

Hi Guys,

I have an issue, I have a very important usb key on which I want to recover data,

I know to do that I have 2 option : -Use a nand adapter to computer (SD often)

Or to swipe the nand chip on another usb pcb

The issue I have is I can't manage after deep search to exactly identify the socket of this chip, the manufactor don't want to provide me this information

It is a SK Hynix chip, I supose E2NAND 64Gb (the ref of the usb key is GOODRAM twister 3.0 64Gb)

The socket looks like the LGA60 (of many iphone chip), but there some difference on some points,

Is it the right information ?

So is the adapter will manage to read the chip ?

If I want to swipe the cheap on another usb pcb, I need to reball it, but I didn't manage to find another stencil than LGA60, with some difference,

So Should I only fill the right whole ? or if there no contact, with the flux and the paste, put paste in all the whole of the stencil is not a problem ?

Here some picture :

[image|1403158]

[image|1403163]

[image|1403167]

[image|1403190]

Thanks in advance for the time and help you will give me

I am sorry to be a newbie and speak bad english, all my apologies for that

Regards

Nico

デバイス:

USB Flash Drive

ステータス:

open

アンサーフォーラムの回答が承認:

編集者： Nicolas Pournot

タイトル:

Try to swipe nand chip on working PCB

テキスト:

デバイス:

USB Flash Drive

ステータス:

open

編集者： Dan

タイトル:

Try to swipe nand chip on working PCB

テキスト:

デバイス:

USB Flash Drive

ステータス:

open

オリジナル投稿者： Nicolas Pournot

タイトル:

Try to swipe nand chip on working PCB

テキスト:

Hi Guys,

I have an issue, I have a very important usb key on which I want to recover data,

I know to do that I have 2 option : -Use a nand adapter to computer (SD often)

Or to swipe the nand chip on another usb pcb

The issue I have is I can't manage after deep search to exactly identify the socket of this chip, the manufactor don't want to provide me this information

It is a SK Hynix chip, I supose E2NAND 64Gb (the ref of the usb key is GOODRAM twister 3.0 64Gb)

The socket looks like the LGA60 (of many iphone chip), but there some difference on some points,

Is it the right information ?

So is the adapter will manage to read the chip ?

If I want to swipe the cheap on another usb pcb, I need to reball it, but I didn't manage to find another stencil than LGA60, with some difference,

So Should I only fill the right whole ? or if there no contact, with the flux and the paste, put paste in all the whole of the stencil is not a problem ?

Here some picture :

[https://ibb.co/kaUQnH|Front chip with reference]

[https://ibb.co/kaUQnH|Chip back]

[https://ibb.co/kaUQnH|reballer stencil]

Thanks in advance for the time and help you will give me

I am sorry to be a newbie and speak bad english, all my apologies for that

Regards

Nico

デバイス:

USB Flash Drive

ステータス:

open