メインコンテンツにスキップ
Student-Contributed Wiki

学生によって寄稿されたWiki

当社の教育プログラムに参加した素晴らしい学生が作成したwikiです。iFixitスタッフによって管理されていません。

Camera won't turn on

No matter what you do, you can't get your Camera to turn on.

Power button may not have been held long enough

Before delving into the guts of your Camera, make sure the hold the power button.

Battery may be dead or need to be replaced

If your Camera won't turn on, try replacing the battery. You can buy a replacement battery from the SONY website.

For instructions to replace your battery click here

Blank display

It is possible that it appears nothing is happening because the display is bad. If the camera turns on but there is no display it is possible the screen is bad and must be replaced.

Motherboard may need to be replaced

If the camera turns on but there is no display then it could be a motherboard problem.

For instructions to replace your motherboard click here

Screen may need to be replaced

The screen could be broken or damaged causing a black or discolored screen.

For instructions to replace your screen click here

Camera Buttons won't work

If nothing happens when the buttons are pressed while the camera is on, the circuit board for the buttons may need to be replaced.

For instructions to replace the button circuit board click here

Camera Case is cracked

If the case for the camera is cracked and needs to be replaced, this can be following the instructions here

my camera autometicly swich camera mode to video mode and video mode to paranoma.whiling am working on cemera .

Ravi - 返信

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 7

今までの合計 433