学生によって寄稿されたWiki
iFixit学生教育プログラムに参加している素晴らしい学生チームが、このWikiを作成しました。
Hover Board Will Not Turn On
Hover board will not power up.
Hover Board Isn't Charged
If the hover board will not illuminate nor function, it may not be charged. Plug the power adapter into the hover board and a 120V power socket. If the charging light illuminates, the hover board is charging. If it does not illuminate, read the other possible issues below.
Broken Power Button
Connect your hover board to its charger. Make sure that the charging light is illuminated, and wait until the battery is fully charged. After the battery is fully charged, press the power button. If the hover board does not turn on, then the power button may need to be replaced. You can replace the power button using (this guide).
Hover Board Won't Charge
Hover board will not receive charge input.
Broken Charging Port
Ensure your charging cable is properly plugged into the charging port on the hover board as well as a functioning 120V power socket . If the charge light does not illuminate on the device, it is not charging properly. Check the charging cable and the charging port for visible damage. If the charging cable is the issue, you can purchase a new one from the manufacturer. If the charging port needs to be replaced, you can replace the charging port using (this guide).
Hover Board Loses Charge Quickly
Hover board battery drains quickly
Deficient Battery
Connect your hover board to its charger. Make sure that the charging light is illuminated, and wait until the battery is fully charged. If your hover board is still experiencing an unusually short battery life, then the battery may need to be replaced. You can replace the battery using (this guide).
Hover Board Is Riding Slowly/Won't Steer
Hover board is slow, unbalanced, or inoperable.
Hover Board Is Riding Slowly
Connect your hover board to its charger. Make sure that the charging light is illuminated, and wait until the battery is fully charged. If your hover board is still experiencing insufficient power output that is causing the ride quality to be slower than usual, then the motherboard may need to be replaced. You can replace the motherboard by using (this guide).
Hover Board Won't Steer Properly
Connect your hover board to its charger. Make sure that the charging light is illuminated, and wait until the battery is fully charged. If your hover board is still experiencing balance issues which make it difficult/impossible to ride, you may need to replace the motherboard. You can replace the motherboard by using (this guide).
チーム
UC Davis, Team S7-G5, Lore Fall 2018 UC Davis, Team S7-G5, Lore Fall 2018人のメンバー
UCD-LORE-F18S7G5
3 メンバー
3のガイドは作成済み
28 件のコメント
Only one side of my overboard is working
Colleen Inzerillo - 返信
Hoverboard overheats quickly
Xavier Lopez - 返信
My hover-1 rocket will charge & keeps beeping. Will not recalibrate.
Dennis Hawes - 返信
Xhover 1 ultra is charged but doesn't powerup all connection are good and battery has 41 voslts. Is there away to test power switch to see if it's working osrd not
Mark Lutz - 返信
Did you ever receive an answer to your question? I'd like to know as well. Same issue. Thanks!
Janet Sinclair -
Check ohms and volts with a test meter.
virgil cantrell -
My Hoover 1 gambit won’t charge a rubber band came out of the charging port
Ashley Storball - 返信
My hoverboard everything is good but it won't charge the light won't even turn on but everything is good what do I do
Angel Barrientos - 返信
Only had scooter for less then 30 days. Will not turn on. It over heated the last time it was on
Barbara Spahr - 返信
How do I check circuit boards to see if one it bad? With out having knowledge of circuit y as far as values or even where to start as far as compassitors, , resisters,s transistors and so forth? Is there away to tell even if there's no apperent visual or smells out of the ordinary?
Mark Lutz - 返信
Hover1 rally only charges half wAy??
Chuck Buenger - 返信
Just got the Hover-1 All Star.
Battery is fully charged. But on power up. I get a green system light and a red flashing light. Board does not function.
josh robinson - 返信
I bought a hover 1 all star in December and my charger indicates fully charged with a green light. However when my child gets on it one side is green the other side shows a red flashing light. We recalibrated and it did not fix the problem. Needing help took bottom off and everything is connected properly. The little black piece that covers the charging port came off is that the problem.
Helen snyder - 返信
Hola quisiera ayuda... El cargador muestra la luz verde aunque no está cargada el scooter y titila con rojo... Que hizo usted para solucionar y ver si funciona en el mío? Gracias
princesskatty2107 -
my hoverboard won’t turn up or charge
Makayla - 返信
LED screen on my Hover1 Dynamo is flashing a backward 3 1 and won't start battery fully charged
Bryan Neal - 返信
I have a question for you
Are we going to doesn't work again
Brodie Johnson - 返信
I don't understand your question.
Janet Sinclair -
Has any 1 ever gotten an answer for any questions asks
Dave Kahle - 返信
No funciona el freno, que puedo hacer
Gianella Gonzales - 返信
I have the Hoover one it will not turn on brand smack new in the lights up there where you push the power but nothing comes on I don't know why
Ozell Love - 返信
My Hover 1 doesn't power up, nor doesn't it show any sign it's charging besides the little green light on the charger.
NowNewEra - 返信
I have not used my hoverboard in a long time and now it won’t charge what do I do
azza_salem1@yahoo.com - 返信
Umm my hover 1 bored will not turn on but the lights on the wheels still come on whe u hand trunk the wheels it lights up what does this mean
Ariel Raynita - 返信
Yellow light flashes for a few minutes when put on charge then no lights at all.
Stuart Dunn - 返信
I have an h1 max. I put on a cart / attachment and when I sit on it and rides it it dies for a few minutes.
Kookie Fabros - 返信
My board won't charge from new
Douglas Moritz - 返信
I have 2 new boards they light up blue but after 15 mins it beeps and shuts off haven't used them yet as they won't charge past 15mins
MELISSA Tucker - 返信