Fixing Master

My printer is connected to my computer via cable but i want to connect it to our network

when I boot up this MacBook without booting it into recovery mode it will boot to the lock screen. but when I boot it into...

I got this for Christmas and don’t know how to play with it.

its not charging when I plug it in but wirelessly charges

I found this mac at a recycling center and noticed that all the screws on the back cover where gone but everything looks...

I tried doing a smc reset but nothing it turns on but the white light stays on

Hi i recently got a new macbook pro early 2013 but the magsafe connector dose not fit could i change the cable?

when open apps on my phone they crash and its slow sometimes it will restart on its own

when I turn on my imac I hear the chime and the crt but it displays nothing

The iPhone XS is “water resistant” was the battery low when you dropped it of so let it dry and charge it. sadly apple don’t not cover water damage. let it sit in rice for like a week. or bring it to a cell phone repair store like mobile repair but why am i even writing this? i’m a 14 year old i’m probably the only young kid that answers questions on i fix it. also my grammar is bad

buy a new computer that should fix the problem

after it runs for a couple of minutes dose it say error 9

Reinstall windows if you have the software

maybe its a lose cable

if your device has had an unexpected shutdown it will automatically turn on a performance managing feature

Go into settings display and font i’m not to sure because I don’t know what software vershion your running play around with the setting you may find it

try getting it on ebay

get a new battery for it

maybe you are not using the right power cord the voltige might be to low

If you can’t find the belt the roomba 4000 uses the same belt or the discovery series

You can get the same belt from the roomba 4000

Im a 14 year old and i had a roomba 530 with a error 9 and i fixed it i love these things there so cool it just takes a long time to fix but it was worth it!

you don’t need to take out the modules to take out the circuit board

you need to unscrew the wheels once you take off the plastic top and remove the ribbon cable for the buttons