Same strobe problem with my relatively new Kenmore. If under warrantee, have them fix. If not, you may be able to fix easily with above suggestions which all have to do with fixing the electrical connection to your light assembly (the main one). My biggest problem was detaching the light assembly. You have a light assembly in the freezer and two in the main compartment, only the top one in main is important. Removing it was the hardest part for me: this link helped: https://www.youtube.com/watch?v=pCY2iaOF... Still, neither a screwdriver nor a putty knife (nor other tools) helped (I was somewhat timid). I happened to have pliers that would open over 2 inches - using them made it easy. The first time, you may have to orient over each of the two tabs to get it to work. A gentle pinch on the front/back of the assembly worked like a charm (may have to move the assembly around once it partially drops to fully detach). The light assembly pops down with one pair of wires to a relatively wide connector and one...
