Ear speaker low and trebley. Cleaned and Changed speaker, still same!I havent posted in a year or so because i left the industry, but I've fixed 1000's of iphones. My wife's ear speaker is...
iPhone 5S water Damaged, Phone works, no LCD with Replace, Bad Chip?I have a 5s a customer brought in w/ severe water damage to lcd flex area and no power. After I went through my usual...
"Ear speaker low and trebley. Cleaned and Changed speaker, still same!"に関する回答Yup, It was the Ear Speaker, Prox. Loc, FF cam flex. I took the old one off the other assembly, reinstalled on my wifes, and it works. Ugh, I do not miss this. Anyone trying this that hasnt before, make sure you heat the front side of the glass just below the FF cam and prox sensor(This will loosen the glue and make it easier to remove), and carefully remove the old with a thin smudger. when installing the new one, make sure everything is perfectly aligned and the cover fits on perfectly. There are no shortcuts and if its not exactly right, and the piece is askew, you can damage your LCD assembly when you put it all back together. Hope this helps someone.
"iPhone 5s - Infinite boot loop (after screen replacement)"に関する回答I've tried everything including swapping battery, LCD assembly, Prox sens(Plugged in and out during start up), BB flex, etc. I've been doing this a long time(22yrs) and thousands of phones, and have not seen this BSOD on a iPhone yet; nevermind the 5s I'm having the problem with now. The PCB below the Flex cover EMI lower two screw holes is fine; no scratching or wear(Totally black). I have a pic, but cannot figure how to upload. There's no liquid damage residue and watermarks are white. Yet another Apple Bomb mystery...