"Why won't my camcorder turn on?"に関する回答Hello Jarretti, Make sure the camera is fully charged or charging. If you connect the device to a computer or a charger, a screen should show that it is charging. If the screen pops up, it means that the camera was fully discharged. If the screen does not pop up, you may have a dysfunctional device but do not be alarmed and upset because there might be a way to fix it! The reasons the camera is not turning on can consist of water damage, the camera may have fallen too hard, the battery is fully discharged while the port is not accepting the cable, etc. If you like to find the cause of the issue and consider fixing it, please take a look at the guides found on the device page where you can find step by step manuals to help narrow the causes down and help get the camera working again. Do not give up on your device! Christian M.
"Why are all my pictures blurry?"に関する回答Hello Jarretti, The problem may be caused by a dirty lens which is possible to may have gotten grains of dirt on the other side of the lens. Because this device is supposed to be water proof, another reason for this issue can be that little water may have gotten inside and the water has caused some kind of condensation inside the lens. If you look into the guides that are given under this device, it explains how you can take the camera apart to clean the lens. Thank you for submitting the question, Christian M.
"Why won't my camcorder charge?"に関する回答Hello Jarretti, Plugging the camera into a computer via USB and having a problem charging does not entirely mean it is caused by the battery. A battery only loses a percentage of life over time and if the camera is still functional, it will never lose 100 percent of the life. In the manual, it mentions that the camera must be turned off in order to charge while being connected to a computer. Once the device is off, there should be a light indicator on the rear of the device turning on. If this didn't fix the issue, I left other causes of the problem below. There might be debris inside the port of the camera which may cause a loss of connection when the USB is connected. The port on the camera can be easily cleaned with a brush. Be careful when cleaning any port on the camera because it can be damaged if you are too harsh. Make sure you do not insert any metal into the port. Another cause for this problem could be that the micro USB port on the camera is dysfunctional. There might have been water leaking...