メインコンテンツにスキップ

この分解は進行中です。 – 最新版を見るには定期的に再読み込みします。

はじめに

This guide will show how to take the back housing off the Tablet portion and the keyboard cover.

  1. After this procedure there seemed to be more back light bleed on my tablet.  Not sure if it was there before so be careful. Remove the tablet from the dock.
    • After this procedure there seemed to be more back light bleed on my tablet. Not sure if it was there before so be careful.

    • Remove the tablet from the dock.

    • Find the best place to insert your plastic pry tool (I used the Micro-SD slot). Carefully go around the perimeter of the tablet and unclip the back cover.

    • Take note off all the clips. The back cover is held in place with a ton of these all around.

  2. Once you have the back cover off you are free to replace what you'd like. Msata SSD Part #MZMTE128HMGR-0000 M.2 2230 WiFi Model #7260NGW
    • Once you have the back cover off you are free to replace what you'd like.

    • Msata SSD Part #MZMTE128HMGR-0000

    • M.2 2230 WiFi Model #7260NGW

  3. PCラップトップ用バッテリー

    iFixitの品質保証付きトップPCブランド用バッテリー

    ショップを見る

    PCラップトップ用バッテリー

    iFixitの品質保証付きトップPCブランド用バッテリー

    ショップを見る
  4. Battery Model #PA5190U-1BRS Motherboard Part #DAOZC1MBADO REV:D Capacitive button/dock board Part #3TCZ1T80000
    • Battery Model #PA5190U-1BRS

    • Motherboard Part #DAOZC1MBADO REV:D

    • Capacitive button/dock board Part #3TCZ1T80000

    • Re-assembly in reverse order.

  5. With the keyboard separated remove all the screws in the bottom. The top 4 screws are longer then the bottom 6. Keyboard back cover Part #ZYE35CZ1BA0100140810-01 REV:3A Keyboard boards and weights.
    • With the keyboard separated remove all the screws in the bottom. The top 4 screws are longer then the bottom 6.

    • Keyboard back cover Part #ZYE35CZ1BA0100140810-01 REV:3A

    • Keyboard boards and weights.

  6. The keyboard dock board.  Looks like there is a way to add a second HDD/SSD here but the connector is not soldered on. Keyboard board Part #CZ1D30E51001CC Mouse board, left-hand weight, front LED board.
    • The keyboard dock board. Looks like there is a way to add a second HDD/SSD here but the connector is not soldered on.

    • Keyboard board Part #CZ1D30E51001CC

    • Mouse board, left-hand weight, front LED board.

    • Re-assembly in reverse order.

Sasa Macura

メンバー登録日: 2014年08月05日

147 ポイント

2のガイドは作成済み

lindas fotos pero no hay un video que muestre como demontar la tapa.

ximena - 返信

muy ilustrativas las imagenes.. tendras algunas donde se vea el mecanismo del teclado donde sujeta a la pantalla ?

carlos - 返信

i need keyboard for this lap how i can get it

Hussien Mahmoud - 返信

コメントを追加する

統計データを表示:

過去 24時間: 2

過去 7 日: 3

過去 30 日: 19

今までの合計 6,692