はじめに

The Timex TX5020 is an electronic thermometer that can be used both indoors and outdoors. It requires only a screwdriver to take apart.

この分解は修理ガイドでは ありません。 お持ちのTimex TX5020 LCD Electronic Thermometerを修理する際は、iFixitの修理ガイドをご利用ください。

  1. Here is the fully assembled thermometer. Here is the fully assembled thermometer.
    • Here is the fully assembled thermometer.

  2. Slide the battery compartment cover off by applying downward and forward pressure.
    • Slide the battery compartment cover off by applying downward and forward pressure.

  3. Loosen and remove the four screws from the back of the thermometer. Loosen and remove the four screws from the back of the thermometer.
    • Loosen and remove the four screws from the back of the thermometer.

  4. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  5. Lift the back panel away from the rest of the case.
    • Lift the back panel away from the rest of the case.

  6. Remove the three screws holding the circuit board in place. Remove the three screws holding the circuit board in place.
    • Remove the three screws holding the circuit board in place.

  7. Lift the circuit board away from the case. Be careful not to pull too hard as the board is attached to the battery contacts.
    • Lift the circuit board away from the case.

    • Be careful not to pull too hard as the board is attached to the battery contacts.

  8. Remove the screen from it's compartment. Remove the push buttons from their compartment.
    • Remove the screen from it's compartment.

    • Remove the push buttons from their compartment.

  9. Here's a full view of the disassembled components (circuit board, screen, push buttons, and case).
    • Here's a full view of the disassembled components (circuit board, screen, push buttons, and case).

Chris L

メンバー登録日: 2014年12月17日

1,102 ポイント

3のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 5

今までの合計 1,110