はじめに

Teardown of the TI BA II Plus calculator.

この分解は修理ガイドでは ありません。 お持ちのTexas Instruments TI BA II Plusを修理する際は、iFixitの修理ガイドをご利用ください。

The BA II Plus Professional calculator.
  • The BA II Plus Professional calculator.

コメントを追加する

Firstly on the back cover, remove the small sticky soft cushioning material covering the recess with the screws in it. 4 of them in total. Unscrew them.
  • Firstly on the back cover, remove the small sticky soft cushioning material covering the recess with the screws in it. 4 of them in total. Unscrew them.

コメントを追加する

  • Remove the battery cover by sliding it out.

コメントを追加する

  • Use a flathead screwdriver to gently part the bottom and top cover at the hinge on the top.

コメントを追加する

  • Removing the back cover to reveal the foil, unscrew the 4 screws holding the foil and 4 other holding the printed circuit board to the front cover.

コメントを追加する

  • Remove the foil. Ensure all screws are off.

コメントを追加する

  • This must separate the front cover from the board. Remove the board and turn it over to view the front side with a soft black cushion cover over a smooth shinny mesh.

コメントを追加する

  • The keys should fall out of the front cover when you turn it over as well. Thats it!!!

コメントを追加する

VSP

メンバー登録日: 2013年06月23日

101 ポイント

1ガイドが承認済み

Well, my TI BA II plus has a broken LCD screen which according to the customer care is not covered under the warranty. Is it possible to find a replacement LCD to replace the broken one in the calculator.

Thanks

VSP - 返信

My calculated get in water, now its not working is there any way to repair it.

ankur - 返信

This is a terrific service that you are providing. It makes fixing thing so much easier. Thank you.

ROB LYTLE - 返信

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 6

過去 30 日: 59

今までの合計 5,598